➢Bandwidth 1.4Mhz/3Mhz/5Mhz/10Mhz/20Mhz
➢10Watts RF power
➢Light weight: 280g
➢Transmitting Power: 40dBm
➢Support 800Mhz/1.4Ghz freqeuncy options
➢Air to ground 100km-150km range
➢NLOS 3km-10km ground to ground distance
➢Automatic power control
➢Automatic frequency point control
➢Ethernet communication via PH2.0 interface
➢RS232 communication via PH2.0 interface
Application
➢Point-to-multipoint long-distance communication
➢Power and hydrological line patrol monitoring
➢Emergency communications for fire fighting, border defense, and military
➢Maritime communications
➢Digital oilfield
➢Fleet formation
Interface
| GENERAL | MECHANICAL | ||
| TECHNOLOGY | MESH based on TD-LTE | TEMPERATURE | -20º to +55ºC |
| ENCRYPTION | ZUC/SNOW3G/AES(128/256) OptionalLayer-2 Encryption | IP RATING | IP65 |
| DATA RATE | 30Mbps | DIMENSIONS | 160.4*68*30mm |
| SENSITIVITY | 10MHz/-103dBm | WEIGHT | 280g |
| RANGE | 100km-150km(Air to ground) NLSO 3km-10km(Ground to ground) (depends on the actual environment) | MATERIAL | Silver Anodized Aluminum |
| NODE | 32 nodes | MOUNTING | Vehicle-mounted/Onboard |
| MIMO | Spatial Multiplexing, Space-Time Coding, TX/RX Eigen Beamforming | POWER | |
| POWER | 10watts | VOLTAGE | DC 24V±10% |
| LATENCY | One Hop Transmission≤30ms | POWER CONSUMPTION | 30Watts |
| FREQUENCY | INTERFACE | ||
| 2.4GHZ | 2401.5-2481.5Mhz | RF | 2 x TNC |
| 1.4GHZ | 1427.9-1447.9MHz | ETHERNET | 1xPH2.0 |
| 800MHZ | 806-826 MHz | PWER | 1 x DC Input |
| Note: The freqeuncy band supports customized | RS232 | 1xPH2.0 | |
| Debug | 1xPH2.0 | ||
COMUART
Electrical Level | 2.85V voltage domain and compatible with 3V/3.3V level |
Control Data | RS232 |
Baud rate | 115200bps |
Transmission Mode | Pass-through mode |
| Priority level | Higher priority than the network port When the signal transmission is crowed, the control data will be transmitted in priority |
Note: 1. The data transmitting and receiving is broadcast in the network. After successful networking, each FD-615MT node can receive serial data. 2. If you want to distinguish between sending, receiving and control, you need to define the format yourself | |
Automatic Frequency Point Control
After booting, the mimo mesh will try to network with the pre-stored frequency points before the last shutdown. If the pre-stored frequency points are not suitable for network deployment, it will automatically try to use other available frequency points for network deployment.
Automatic Power Control
The transmitting power will be automatically adjusted and controlled according to the real time signal quality.
Emergency Ad-hoc Network Solution Portable Emergency Command System Drone Video Transmitters 5km UAV Video Transmitter 10km Drone Video Transmitter 50km Drone Video Transmitter 100km Airborne Video Downlink NLOS Wireless Video Transmitter PtMP Wireless Video Transmitter Wireless MESH Network